Soundaware A1 Streaming Desktop Network Player with Remote Control Digital Turntable Decoding Amplifier Roon Ready Supported

Soundaware A1 Streaming Desktop Network Player with Remote Control Digital Turntable Decoding Amplifier Roon Ready Supported

Write a review
Available: In Stock
$699.00
color
Add Wishlist

Secure Checkout

  • Order within

Specification:
Input interface
SD: support theoretical 2TB, measurement 400GB, NTFS, exfat, fat32
USB * 2: The maximum partition supports 2TB, the hard disk test supports 4TB (the theory may be higher), the maximum current is 600 ma.

Note:
If the frequency exceeds 192 kHz, it is recommended to use the original cassette SSD hard disk at high speed, as there are certain requirements on the response speed and stability of the peripheral interface.

Network: 100Mbps, Samba mapping (192kHz, 32bit, DSD64), support such as DLNA, RoonReady, Airplay
HIFI Bluetooth: Supports Universal Bluetooth protocol such as APTX, but it is recommended to adjust the volume of mobile phone / PAD to maximum.
USB FPGA sound card: 32-bit 384 kHz, DSD 256 (THESYCON driver must be installed on DSD 128 or later)

Output interface
3.5mm headphone port: Optimized for earplugs and high sensitivity low impedance headphones to reduce low noise.
6.35 mm interface: Designed for low sensitivity headphones or earphones.
Note: It is recommended to listen at high volume, 99 volume most load distortion is less than 0.004%.
RCA * 2: 1.8 V RMS
Coaxial: 0.5 V pp 192 kHz DSD64 DOP 24 bit
Fiber: 96 kHz, 24 bit

Prototype Metrics:

THD + N: 0.002% or less (RCA and amplifier)
Frequency response: ± 0.3 dB
Dynamic ratio: 116 dB
Signal to noise ratio: 109 dB
Low noise: -120 dB

IOS: DSD 64 (non DST compression)
DSF: DSD 256 (non DST compression)
DFF: DSD 256 (non DST compression)
WAV: 32 nbit 384 kHz
FLAC: 24 bits 386 kHz
APE: 48 kHz (Fly Extra High or higher compression level)
ALAC: 48 kHz
AIFF: 48 kHz
MP3: 48 kHz
AAC: 48 kHz
Supports ISO and CUE lists.
Native playback supports seamless playback of the same frequency.


RoonReady: Native support for DSD256, PCM32bit, Tidal, Qobuz, Dropbox, MQA and more. Supports seamless playback of the same frequency.

Airplay: Supports an IOS system for seamlessly pushing music to the host.
DLNA: Support for remote playback of local music, support for local playback of remote music, support for remote push, support for remote control, support for ISO, CUE and other local playback, support for display control of various formats.
QQ music Qplay supports online music remote push such as Netease cloud music push.



Features:
Multifunctional Streaming Music Player:
Support Roon Ready, Airplay, DLNA, Samba etc, sampling rate to PCM 384Khz and DSD256 Patented FPGA technology optimized LAN/WAN player with dual headphone output

USB DAC/Headphone Amplifier:
Xmos plus FPGA clock processed DA dual headphone output

HIFI Bluetooth DAC/Headphone Amplifier :
HIFI level bluetooth dual headphone output processed by FPGA clock 

CD Player and Ripper:
Connected to appointed USB driver, Al can play and rip CD in high precision mode

SD Card/HDD Music Player:
Large capacity SD card/HDD supported, high performance off-line music player

High-performance Interface Network Digital Transport :
Inherited technology from 300 serie A1 has the interface and transport system based on the latest patent FPGA algorithm



Specification:
Input interface
SD: support theoretical 2TB, measurement 400GB, NTFS, exfat, fat32
USB * 2: The maximum partition supports 2TB, the hard disk test supports 4TB (the theory may be higher), the maximum current is 600 ma.

Note:
If the frequency exceeds 192 kHz, it is recommended to use the original cassette SSD hard disk at high speed, as there are certain requirements on the response speed and stability of the peripheral interface.

Network: 100Mbps, Samba mapping (192kHz, 32bit, DSD64), support such as DLNA, RoonReady, Airplay
HIFI Bluetooth: Supports Universal Bluetooth protocol such as APTX, but it is recommended to adjust the volume of mobile phone / PAD to maximum.
USB FPGA sound card: 32-bit 384 kHz, DSD 256 (THESYCON driver must be installed on DSD 128 or later)

Output interface
3.5mm headphone port: Optimized for earplugs and high sensitivity low impedance headphones to reduce low noise.
6.35 mm interface: Designed for low sensitivity headphones or earphones.
Note: It is recommended to listen at high volume, 99 volume most load distortion is less than 0.004%.
RCA * 2: 1.8 V RMS
Coaxial: 0.5 V pp 192 kHz DSD64 DOP 24 bit
Fiber: 96 kHz, 24 bit

Prototype Metrics:

THD + N: 0.002% or less (RCA and amplifier)
Frequency response: ± 0.3 dB
Dynamic ratio: 116 dB
Signal to noise ratio: 109 dB
Low noise: -120 dB

IOS: DSD 64 (non DST compression)
DSF: DSD 256 (non DST compression)
DFF: DSD 256 (non DST compression)
WAV: 32 nbit 384 kHz
FLAC: 24 bits 386 kHz
APE: 48 kHz (Fly Extra High or higher compression level)
ALAC: 48 kHz
AIFF: 48 kHz
MP3: 48 kHz
AAC: 48 kHz
Supports ISO and CUE lists.
Native playback supports seamless playback of the same frequency.


RoonReady: Native support for DSD256, PCM32bit, Tidal, Qobuz, Dropbox, MQA and more. Supports seamless playback of the same frequency.

Airplay: Supports an IOS system for seamlessly pushing music to the host.
DLNA: Support for remote playback of local music, support for local playback of remote music, support for remote push, support for remote control, support for ISO, CUE and other local playback, support for display control of various formats.
QQ music Qplay supports online music remote push such as Netease cloud music push.



Features:
Multifunctional Streaming Music Player:
Support Roon Ready, Airplay, DLNA, Samba etc, sampling rate to PCM 384Khz and DSD256 Patented FPGA technology optimized LAN/WAN player with dual headphone output

USB DAC/Headphone Amplifier:
Xmos plus FPGA clock processed DA dual headphone output

HIFI Bluetooth DAC/Headphone Amplifier :
HIFI level bluetooth dual headphone output processed by FPGA clock 

CD Player and Ripper:
Connected to appointed USB driver, Al can play and rip CD in high precision mode

SD Card/HDD Music Player:
Large capacity SD card/HDD supported, high performance off-line music player

High-performance Interface Network Digital Transport :
Inherited technology from 300 serie A1 has the interface and transport system based on the latest patent FPGA algorithm



1.Price and Payment.

Product shall be sold to Buyer at the prices quoted to Buyer upon acceptance of each Order. shenzhenaudio.com reserves the right to change the prices for products from time to time. Prices are stated in United States dollars and payment shall be made in United States currency. Unless other payment terms are previously agreed in writing by shenzhenaudio.com, Buyer shall make full payment in advance for all products ordered. In the event Buyer does not make timely payments, shenzhenaudio.com may, in addition to all other remedies provided at law, either: (1) declare Buyer’s performance in breach and terminate an Order for default; (2) repossess the goods for which payment has not been made; (3) withhold future shipments under an Order until delinquent payments are made; (4) deliver future shipments under an Order on a cash with order or cash in advance basis even after the delinquency is cured; (5) charge interest on the delinquency at a rate of 1½% per month or the maximum rate permitted by law, if lower, for each month or part thereof of delinquency in payment plus applicable storage charges, or inventory carrying charges; or (6) recover all costs of collection including reasonable attorney’s fees; and (7) at shenzhenaudio.com’s option, combine any of the above rights and remedies as provided by law.

2.Delivery.

2.1 Date. Any delivery date stated in any document (including an Order) is approximate only and shall not constitute any guarantee of delivery on any particular date.
2.2 Terms. Delivery shall be DHL, EMS, Singapore Post, UPS and Fedex.

3.Taxes.

Buyer shall be responsible for, and shall pay, any taxes (sales, excise, use, etc.) and any export or import dues that may be applicable to the sale and/or delivery of the products. Accordingly, shenzhenaudio.com reserves the right to revise its price after the execution of an Order between the parties to include any and all taxes or duties that may become due hereunder and shenzhenaudio.com may invoice Buyer for said additional amount. This clause shall survive the acceptance and complete performance of an Order by the parties herein.

4.Return Policy.

All of our products are One Year Warranty.
For the first 30 days from the date of purchase, most items may be returned for either money back* or exchange* subject to the following conditions.
• Any item returned must be complete with all accessories, hardware, manuals or instructions, and in the same "new" condition as when it was when shipped to you.
• Any item returned incomplete or with physical damage such as scratches etc., excessive signs of use or abuse will not be accepted for return.
• If the item is returned without its complete original packaging (original box, foam padding etc.), a re-stocking fee of 25% will apply.
• Any "Special Order" item returned is subject to a 35% restocking fee, plus an additional 10% if returned without its complete original packaging (original box, foam padding etc.)
Any item returned will be evaluated upon receipt. Of course, we cannot give refunds on defective merchandise resulting from mishandling, misuse, tampering or improper use.
Items should be shipped insured for full value as they are your responsibility until we receive them.
We will ship your replacement free of charge should you opt for an exchange.
After the initial 30 day period and up to one year from the purchase date, we will repair or replace the item at our discretion.*
All warranty is administered in China directly by SHENZHENAUDIO. Please contact support@shenzhenaudio.com.
*shipping charges are not included.