Singxer F-1 XMOS USB digital interface board,XU208 chip,High end U8 upgraded version

Singxer F-1 XMOS USB digital interface board,XU208 chip,High end U8 upgraded version

Write a review
Available: In Stock
$179.99
Add Wishlist

Secure Checkout

  • Order within

Description:
F-1 digital interface,our team develop a high-performance USB digital audio interface, using the XMOS latest xCORE-200 series chips.F-1 use low jitter clock system digital interface. F-1 digital interface using standard USB2.0 input interface, while F-1 has many kinds of output interfaces, including coaxial RCA and I2S interfaces.

The new generation XOMS chip of XU208,using more advanced process technology,performance than the older U8 chip doubled, reaching 1000MIPS processing capabilities.

1.F-1 is the first use of XMOS latest xCORE-200 series USB interface digital products. New generation XMOS chip,using more advanced process technology, performance than the older U8 chip doubled,reaching 1000MIPS processing capabilities.

2.It is known that the core of the algorithm is heavy digital audio.Our team in the field of digital audio work for many years, at the same time get XMOS FAE support team, we conducted a number of technical improvements and optimization algorithms on the basis of the original firmware.


Specifications:
Each output interface supports sample rates:
PCM: 44.1KHz,48KHz,88.2KHz,96KHz,
176.4KHz, 192KHz,352.8KHz,384KHz
Wherein I2S out support full sample rate,S/PDIF supports up to 192KHz
DSD: 
2.8 MHz (DSD64) - DoP,native
5.6 MHz (DSD128) - DoP,native
11.2 MHz (DSD256) - native
Wherein I2S out support all DSD format,S/PDIF and AES/EBU support DSD64 DOP mode
Bits wide: 
the highest 32 bit over I2S output
The highest 24 bit over S/PDIF

Screw position,I2S is compatible with Amanero board.
Use three crystal oscillators,they are all active crystal oscillators,and the audio crystal oscillators is CRYSTEK CCHD.


Each interface electrical standards:
1.USB input socket is a standard USB-B type female, USB power supply range 4.5V-5.1V ;
2.RCA connector outputs standard S/PDIF Electricity level is 550mV(standard connection load),the output impedance of 75 ohms.


Design details:
1. Carry out electricity as the mother of the acoustic design concept,pay attention to the power supply circuit design,high-performance,low noise and fast response of the LDO as the main power source.The entire board with a 2-way independent LDO for power supply,part of the clock use ADI's ultra low noise LDO,in order to ensure the ultimate performance.

2. PCB motherboard with 4-layer circuit board design,make sure you have a complete ground plane and power planes,high-speed digital design methods to ensure signal integrity and power integrity of the entire board.The clock signal with a special pocessing,the use of package design and precise impedance control,thereby ensuring the signal quality and increase the clock anti-jamming capability.Input and output signals follow standard design,especially USB high speed signals using a 90 ohm differential impedance control.


System compatible:
1:Windows 7,Windows 8;32/64 bit,need install driver
2:Native MacOS 10.6 and later,use own driver
3:Native Linux with UAC2 compliant kernel,use own driver
4:Android OS 4.2 and above,need support OTG function


The instruction of I2S output signal scoket:
1.It is High dB mute(DSD ON is DSD data stream)
2.All dB is LVCMOS,Voltage is 3.3V.
3.VD3.3 is output supply,and output electric current 50mA
4.MCLK output 22.5792Mhz or 24.576Mhz clock
5.FS0,FS1,FS2 is sample dB,FS3 not.
6.LRCLK =DSDR,SDATA=DSDL,BCLK=DCLK

Description:
F-1 digital interface,our team develop a high-performance USB digital audio interface, using the XMOS latest xCORE-200 series chips.F-1 use low jitter clock system digital interface. F-1 digital interface using standard USB2.0 input interface, while F-1 has many kinds of output interfaces, including coaxial RCA and I2S interfaces.

The new generation XOMS chip of XU208,using more advanced process technology,performance than the older U8 chip doubled, reaching 1000MIPS processing capabilities.

1.F-1 is the first use of XMOS latest xCORE-200 series USB interface digital products. New generation XMOS chip,using more advanced process technology, performance than the older U8 chip doubled,reaching 1000MIPS processing capabilities.

2.It is known that the core of the algorithm is heavy digital audio.Our team in the field of digital audio work for many years, at the same time get XMOS FAE support team, we conducted a number of technical improvements and optimization algorithms on the basis of the original firmware.


Specifications:
Each output interface supports sample rates:
PCM: 44.1KHz,48KHz,88.2KHz,96KHz,
176.4KHz, 192KHz,352.8KHz,384KHz
Wherein I2S out support full sample rate,S/PDIF supports up to 192KHz
DSD: 
2.8 MHz (DSD64) - DoP,native
5.6 MHz (DSD128) - DoP,native
11.2 MHz (DSD256) - native
Wherein I2S out support all DSD format,S/PDIF and AES/EBU support DSD64 DOP mode
Bits wide: 
the highest 32 bit over I2S output
The highest 24 bit over S/PDIF

Screw position,I2S is compatible with Amanero board.
Use three crystal oscillators,they are all active crystal oscillators,and the audio crystal oscillators is CRYSTEK CCHD.


Each interface electrical standards:
1.USB input socket is a standard USB-B type female, USB power supply range 4.5V-5.1V ;
2.RCA connector outputs standard S/PDIF Electricity level is 550mV(standard connection load),the output impedance of 75 ohms.


Design details:
1. Carry out electricity as the mother of the acoustic design concept,pay attention to the power supply circuit design,high-performance,low noise and fast response of the LDO as the main power source.The entire board with a 2-way independent LDO for power supply,part of the clock use ADI's ultra low noise LDO,in order to ensure the ultimate performance.

2. PCB motherboard with 4-layer circuit board design,make sure you have a complete ground plane and power planes,high-speed digital design methods to ensure signal integrity and power integrity of the entire board.The clock signal with a special pocessing,the use of package design and precise impedance control,thereby ensuring the signal quality and increase the clock anti-jamming capability.Input and output signals follow standard design,especially USB high speed signals using a 90 ohm differential impedance control.


System compatible:
1:Windows 7,Windows 8;32/64 bit,need install driver
2:Native MacOS 10.6 and later,use own driver
3:Native Linux with UAC2 compliant kernel,use own driver
4:Android OS 4.2 and above,need support OTG function


The instruction of I2S output signal scoket:
1.It is High dB mute(DSD ON is DSD data stream)
2.All dB is LVCMOS,Voltage is 3.3V.
3.VD3.3 is output supply,and output electric current 50mA
4.MCLK output 22.5792Mhz or 24.576Mhz clock
5.FS0,FS1,FS2 is sample dB,FS3 not.
6.LRCLK =DSDR,SDATA=DSDL,BCLK=DCLK

1.Price and Payment.

Product shall be sold to Buyer at the prices quoted to Buyer upon acceptance of each Order. shenzhenaudio.com reserves the right to change the prices for products from time to time. Prices are stated in United States dollars and payment shall be made in United States currency. Unless other payment terms are previously agreed in writing by shenzhenaudio.com, Buyer shall make full payment in advance for all products ordered. In the event Buyer does not make timely payments, shenzhenaudio.com may, in addition to all other remedies provided at law, either: (1) declare Buyer’s performance in breach and terminate an Order for default; (2) repossess the goods for which payment has not been made; (3) withhold future shipments under an Order until delinquent payments are made; (4) deliver future shipments under an Order on a cash with order or cash in advance basis even after the delinquency is cured; (5) charge interest on the delinquency at a rate of 1½% per month or the maximum rate permitted by law, if lower, for each month or part thereof of delinquency in payment plus applicable storage charges, or inventory carrying charges; or (6) recover all costs of collection including reasonable attorney’s fees; and (7) at shenzhenaudio.com’s option, combine any of the above rights and remedies as provided by law.

2.Delivery.

2.1 Date. Any delivery date stated in any document (including an Order) is approximate only and shall not constitute any guarantee of delivery on any particular date.
2.2 Terms. Delivery shall be DHL, EMS, Singapore Post, UPS and Fedex.

3.Taxes.

Buyer shall be responsible for, and shall pay, any taxes (sales, excise, use, etc.) and any export or import dues that may be applicable to the sale and/or delivery of the products. Accordingly, shenzhenaudio.com reserves the right to revise its price after the execution of an Order between the parties to include any and all taxes or duties that may become due hereunder and shenzhenaudio.com may invoice Buyer for said additional amount. This clause shall survive the acceptance and complete performance of an Order by the parties herein.

4.Return Policy.

All of our products are One Year Warranty.
For the first 30 days from the date of purchase, most items may be returned for either money back* or exchange* subject to the following conditions.
• Any item returned must be complete with all accessories, hardware, manuals or instructions, and in the same "new" condition as when it was when shipped to you.
• Any item returned incomplete or with physical damage such as scratches etc., excessive signs of use or abuse will not be accepted for return.
• If the item is returned without its complete original packaging (original box, foam padding etc.), a re-stocking fee of 25% will apply.
• Any "Special Order" item returned is subject to a 35% restocking fee, plus an additional 10% if returned without its complete original packaging (original box, foam padding etc.)
Any item returned will be evaluated upon receipt. Of course, we cannot give refunds on defective merchandise resulting from mishandling, misuse, tampering or improper use.
Items should be shipped insured for full value as they are your responsibility until we receive them.
We will ship your replacement free of charge should you opt for an exchange.
After the initial 30 day period and up to one year from the purchase date, we will repair or replace the item at our discretion.*
All warranty is administered in China directly by SHENZHENAUDIO. Please contact support@shenzhenaudio.com.
*shipping charges are not included.