Matrix element H Hi-Fi USB 3.0 Interface

Matrix element H Hi-Fi USB 3.0 Interface

Write a review
Available: In Stock
$249.00
Add Wishlist

Secure Checkout

  • Order within

element H USB 3.0 interface is designed for increasing the USB audio quality of computer. It increased the data transport quality and reduced the power supply noise, which make changes to your PC Hi-Fi system from the source.
 

Femtosecond Clock

element H uses Crystek CCHD-575 super-low noise femtosecond clock coordinate with USB 3.0 bridge chip from Texas Instruments, open up independent data channel for USB audio stream. It helps signal bypass the USB controller integrated in the motherboard, avoid sharing data channels with other USB devices.
 

High Quality Bus Power Supply

element H integrated multiple filter units for USB power supply, uses solid capacitors and low noise high current LDO chips. Even if use the USB internal power supply, it also can effectively eliminate the high frequency noise caused by the PC switching power. The USB port can supply a maximum current at 5V/1.5A for all audio devices supplied by the USB port. and can prevent devices from over current or short circuit.
 

External Power Supply Supported

There are internal and external power supply available, you can choose these kinds of power supply on element H by sliding the switch on the panel. You also can turn off the USB bus power supply for the devices which has independent power supply.
 

Superb Performance & Stylish Design

With four-layer PCB of high speed circuit design standard, strictly in according with high-speed circuit design specifications. The circuit meet the differential pair impedance standard and the equal line length demand. The CNC aluminum chassis prevent the radiated interference effectively, giving consideration to the heat dissipation requirements of the power supply chip on board.

 

Speciflcations

Technical:

SB Port Specs: SB 3.0-Compliant xHCI Host Controller

PCIe x1 Gen2 Interface

One Downstream Port

 

Drivers Installation:

Drivers will installed automatically on Windows 8/8.1/10 system, or you can download it from the product page manually.

It's no need to install drivers on the mainstream version of OS based on Linux.
 

Power:

Power Supply Specs:

SB power supply output: MAX 5V/1500mA

External power supply: DC 9~12V,≥1200mA

Power supply port: outer diameter 5.5mm; inner diameter 2.1mm (+ for inner, - for outer)

 

NOTE:

Please do not connect to the power supply with a voltage above 12V, or will cause damage.

Some USB devices do not use the power supply from USB port, but it does not mean the bus
power supply could be unplugged, or it will cause the USB devices to malfunction.

Please disconnect your USB device before you change the X-Hi's power supply mode. If you
switch the power supply mode when device is connected, the USB bus power supply surge
may cause the device to malfunction.

 

Demention: 114mm×64mm×23mm (Including the protruding part)
 

Accessory:

Adapter Cable:4 pin D-type to SATA 15 pin adapter cable ×1

Standard Baffle:×1

Half-height Baffle:×1

element H USB 3.0 interface is designed for increasing the USB audio quality of computer. It increased the data transport quality and reduced the power supply noise, which make changes to your PC Hi-Fi system from the source.
 

Femtosecond Clock

element H uses Crystek CCHD-575 super-low noise femtosecond clock coordinate with USB 3.0 bridge chip from Texas Instruments, open up independent data channel for USB audio stream. It helps signal bypass the USB controller integrated in the motherboard, avoid sharing data channels with other USB devices.
 

High Quality Bus Power Supply

element H integrated multiple filter units for USB power supply, uses solid capacitors and low noise high current LDO chips. Even if use the USB internal power supply, it also can effectively eliminate the high frequency noise caused by the PC switching power. The USB port can supply a maximum current at 5V/1.5A for all audio devices supplied by the USB port. and can prevent devices from over current or short circuit.
 

External Power Supply Supported

There are internal and external power supply available, you can choose these kinds of power supply on element H by sliding the switch on the panel. You also can turn off the USB bus power supply for the devices which has independent power supply.
 

Superb Performance & Stylish Design

With four-layer PCB of high speed circuit design standard, strictly in according with high-speed circuit design specifications. The circuit meet the differential pair impedance standard and the equal line length demand. The CNC aluminum chassis prevent the radiated interference effectively, giving consideration to the heat dissipation requirements of the power supply chip on board.

 

Speciflcations

Technical:

SB Port Specs: SB 3.0-Compliant xHCI Host Controller

PCIe x1 Gen2 Interface

One Downstream Port

 

Drivers Installation:

Drivers will installed automatically on Windows 8/8.1/10 system, or you can download it from the product page manually.

It's no need to install drivers on the mainstream version of OS based on Linux.
 

Power:

Power Supply Specs:

SB power supply output: MAX 5V/1500mA

External power supply: DC 9~12V,≥1200mA

Power supply port: outer diameter 5.5mm; inner diameter 2.1mm (+ for inner, - for outer)

 

NOTE:

Please do not connect to the power supply with a voltage above 12V, or will cause damage.

Some USB devices do not use the power supply from USB port, but it does not mean the bus
power supply could be unplugged, or it will cause the USB devices to malfunction.

Please disconnect your USB device before you change the X-Hi's power supply mode. If you
switch the power supply mode when device is connected, the USB bus power supply surge
may cause the device to malfunction.

 

Demention: 114mm×64mm×23mm (Including the protruding part)
 

Accessory:

Adapter Cable:4 pin D-type to SATA 15 pin adapter cable ×1

Standard Baffle:×1

Half-height Baffle:×1

1.Price and Payment.

Product shall be sold to Buyer at the prices quoted to Buyer upon acceptance of each Order. shenzhenaudio.com reserves the right to change the prices for products from time to time. Prices are stated in United States dollars and payment shall be made in United States currency. Unless other payment terms are previously agreed in writing by shenzhenaudio.com, Buyer shall make full payment in advance for all products ordered. In the event Buyer does not make timely payments, shenzhenaudio.com may, in addition to all other remedies provided at law, either: (1) declare Buyer’s performance in breach and terminate an Order for default; (2) repossess the goods for which payment has not been made; (3) withhold future shipments under an Order until delinquent payments are made; (4) deliver future shipments under an Order on a cash with order or cash in advance basis even after the delinquency is cured; (5) charge interest on the delinquency at a rate of 1½% per month or the maximum rate permitted by law, if lower, for each month or part thereof of delinquency in payment plus applicable storage charges, or inventory carrying charges; or (6) recover all costs of collection including reasonable attorney’s fees; and (7) at shenzhenaudio.com’s option, combine any of the above rights and remedies as provided by law.

2.Delivery.

2.1 Date. Any delivery date stated in any document (including an Order) is approximate only and shall not constitute any guarantee of delivery on any particular date.
2.2 Terms. Delivery shall be DHL, EMS, Singapore Post, UPS and Fedex.

3.Taxes.

Buyer shall be responsible for, and shall pay, any taxes (sales, excise, use, etc.) and any export or import dues that may be applicable to the sale and/or delivery of the products. Accordingly, shenzhenaudio.com reserves the right to revise its price after the execution of an Order between the parties to include any and all taxes or duties that may become due hereunder and shenzhenaudio.com may invoice Buyer for said additional amount. This clause shall survive the acceptance and complete performance of an Order by the parties herein.

4.Return Policy.

All of our products are One Year Warranty.
For the first 30 days from the date of purchase, most items may be returned for either money back* or exchange* subject to the following conditions.
• Any item returned must be complete with all accessories, hardware, manuals or instructions, and in the same "new" condition as when it was when shipped to you.
• Any item returned incomplete or with physical damage such as scratches etc., excessive signs of use or abuse will not be accepted for return.
• If the item is returned without its complete original packaging (original box, foam padding etc.), a re-stocking fee of 25% will apply.
• Any "Special Order" item returned is subject to a 35% restocking fee, plus an additional 10% if returned without its complete original packaging (original box, foam padding etc.)
Any item returned will be evaluated upon receipt. Of course, we cannot give refunds on defective merchandise resulting from mishandling, misuse, tampering or improper use.
Items should be shipped insured for full value as they are your responsibility until we receive them.
We will ship your replacement free of charge should you opt for an exchange.
After the initial 30 day period and up to one year from the purchase date, we will repair or replace the item at our discretion.*
All warranty is administered in China directly by SHENZHENAUDIO. Please contact support@shenzhenaudio.com.
*shipping charges are not included.