Singxer F-1 XMOS USB digital interface board,XU208 chip,High end U8 upgraded version

Singxer F-1 XMOS USB digital interface board,XU208 chip,High end U8 upgraded version

Write a review
Available: In Stock
$158.39 $179.99
Add Wishlist

Secure Checkout

  • Order within

Description:
F-1 digital interface,our team develop a high-performance USB digital audio interface, using the XMOS latest xCORE-200 series chips.F-1 use low jitter clock system digital interface. F-1 digital interface using standard USB2.0 input interface, while F-1 has many kinds of output interfaces, including coaxial RCA and I2S interfaces.

The new generation XOMS chip of XU208,using more advanced process technology,performance than the older U8 chip doubled, reaching 1000MIPS processing capabilities.

1.F-1 is the first use of XMOS latest xCORE-200 series USB interface digital products. New generation XMOS chip,using more advanced process technology, performance than the older U8 chip doubled,reaching 1000MIPS processing capabilities.

2.It is known that the core of the algorithm is heavy digital audio.Our team in the field of digital audio work for many years, at the same time get XMOS FAE support team, we conducted a number of technical improvements and optimization algorithms on the basis of the original firmware.


Specifications:
Each output interface supports sample rates:
PCM: 44.1KHz,48KHz,88.2KHz,96KHz,
176.4KHz, 192KHz,352.8KHz,384KHz
Wherein I2S out support full sample rate,S/PDIF supports up to 192KHz
DSD: 
2.8 MHz (DSD64) - DoP,native
5.6 MHz (DSD128) - DoP,native
11.2 MHz (DSD256) - native
Wherein I2S out support all DSD format,S/PDIF and AES/EBU support DSD64 DOP mode
Bits wide: 
the highest 32 bit over I2S output
The highest 24 bit over S/PDIF

Screw position,I2S is compatible with Amanero board.
Use three crystal oscillators,they are all active crystal oscillators,and the audio crystal oscillators is CRYSTEK CCHD.


Each interface electrical standards:
1.USB input socket is a standard USB-B type female, USB power supply range 4.5V-5.1V ;
2.RCA connector outputs standard S/PDIF Electricity level is 550mV(standard connection load),the output impedance of 75 ohms.


Design details:
1. Carry out electricity as the mother of the acoustic design concept,pay attention to the power supply circuit design,high-performance,low noise and fast response of the LDO as the main power source.The entire board with a 2-way independent LDO for power supply,part of the clock use ADI's ultra low noise LDO,in order to ensure the ultimate performance.

2. PCB motherboard with 4-layer circuit board design,make sure you have a complete ground plane and power planes,high-speed digital design methods to ensure signal integrity and power integrity of the entire board.The clock signal with a special pocessing,the use of package design and precise impedance control,thereby ensuring the signal quality and increase the clock anti-jamming capability.Input and output signals follow standard design,especially USB high speed signals using a 90 ohm differential impedance control.


System compatible:
1:Windows 7,Windows 8;32/64 bit,need install driver
2:Native MacOS 10.6 and later,use own driver
3:Native Linux with UAC2 compliant kernel,use own driver
4:Android OS 4.2 and above,need support OTG function


The instruction of I2S output signal scoket:
1.It is High dB mute(DSD ON is DSD data stream)
2.All dB is LVCMOS,Voltage is 3.3V.
3.VD3.3 is output supply,and output electric current 50mA
4.MCLK output 22.5792Mhz or 24.576Mhz clock
5.FS0,FS1,FS2 is sample dB,FS3 not.
6.LRCLK =DSDR,SDATA=DSDL,BCLK=DCLK

Description:
F-1 digital interface,our team develop a high-performance USB digital audio interface, using the XMOS latest xCORE-200 series chips.F-1 use low jitter clock system digital interface. F-1 digital interface using standard USB2.0 input interface, while F-1 has many kinds of output interfaces, including coaxial RCA and I2S interfaces.

The new generation XOMS chip of XU208,using more advanced process technology,performance than the older U8 chip doubled, reaching 1000MIPS processing capabilities.

1.F-1 is the first use of XMOS latest xCORE-200 series USB interface digital products. New generation XMOS chip,using more advanced process technology, performance than the older U8 chip doubled,reaching 1000MIPS processing capabilities.

2.It is known that the core of the algorithm is heavy digital audio.Our team in the field of digital audio work for many years, at the same time get XMOS FAE support team, we conducted a number of technical improvements and optimization algorithms on the basis of the original firmware.


Specifications:
Each output interface supports sample rates:
PCM: 44.1KHz,48KHz,88.2KHz,96KHz,
176.4KHz, 192KHz,352.8KHz,384KHz
Wherein I2S out support full sample rate,S/PDIF supports up to 192KHz
DSD: 
2.8 MHz (DSD64) - DoP,native
5.6 MHz (DSD128) - DoP,native
11.2 MHz (DSD256) - native
Wherein I2S out support all DSD format,S/PDIF and AES/EBU support DSD64 DOP mode
Bits wide: 
the highest 32 bit over I2S output
The highest 24 bit over S/PDIF

Screw position,I2S is compatible with Amanero board.
Use three crystal oscillators,they are all active crystal oscillators,and the audio crystal oscillators is CRYSTEK CCHD.


Each interface electrical standards:
1.USB input socket is a standard USB-B type female, USB power supply range 4.5V-5.1V ;
2.RCA connector outputs standard S/PDIF Electricity level is 550mV(standard connection load),the output impedance of 75 ohms.


Design details:
1. Carry out electricity as the mother of the acoustic design concept,pay attention to the power supply circuit design,high-performance,low noise and fast response of the LDO as the main power source.The entire board with a 2-way independent LDO for power supply,part of the clock use ADI's ultra low noise LDO,in order to ensure the ultimate performance.

2. PCB motherboard with 4-layer circuit board design,make sure you have a complete ground plane and power planes,high-speed digital design methods to ensure signal integrity and power integrity of the entire board.The clock signal with a special pocessing,the use of package design and precise impedance control,thereby ensuring the signal quality and increase the clock anti-jamming capability.Input and output signals follow standard design,especially USB high speed signals using a 90 ohm differential impedance control.


System compatible:
1:Windows 7,Windows 8;32/64 bit,need install driver
2:Native MacOS 10.6 and later,use own driver
3:Native Linux with UAC2 compliant kernel,use own driver
4:Android OS 4.2 and above,need support OTG function


The instruction of I2S output signal scoket:
1.It is High dB mute(DSD ON is DSD data stream)
2.All dB is LVCMOS,Voltage is 3.3V.
3.VD3.3 is output supply,and output electric current 50mA
4.MCLK output 22.5792Mhz or 24.576Mhz clock
5.FS0,FS1,FS2 is sample dB,FS3 not.
6.LRCLK =DSDR,SDATA=DSDL,BCLK=DCLK

Shipping Fees

Worldwide Free Shipping on SHENZHENAUDIO, Please allow 1-3 business days for conduct Quality Control in order to ensure the products quality.

In the event that a shipment is refused delivery by the recipient, is undeliverable, or is returned to sender, SHENZHENAUDIO will process a refund to the original payment method used.

If a customer would like the order reshipped, they’ll be charged a reshipment fee. Customers may also be subject to a restocking fee of up to 20 percent of the product cost.



Which Couriers To Use?

Given the amount of shipping partners we work with and the vast coverage area we serve, there are likely regions with much longer transit times than others. If you have any feedback, suggestions, or problems with the courier of your shipment, please feel free to submit a support ticket via the "Contact Us" button below.

Our goal is to provide our customers with the best shipping experience possible at a reasonable cost. This is why we constantly negotiate with existing shipping partners for lower rates and actively test new couriers for potential opportunities.



PO boxes or APO/FPO

The ability to ship to PO boxes or an APO/FPO address depends on the item's weight. If an item weighs more than 9 pounds, we won’t be able to ship to these addresses because of our current courier agreements.

To determine if your order is eligible for shipment to PO boxes or an APO/FPO address, please contact SHENZHENAUDIO Support.



Estimated Delivery Time

For customers in the continental United States:
5 to 14 business days from the date of shipping

For customers in Hawaii and Puerto Rico:
2 to 4 weeks from the date of shipping
International customers can expect longer shipping times, depending on the country in which they live:

Canada: 1 to 3 weeks from the date of shipping
Australia, New Zealand, Germany, France, and the UK: 2 to 4 weeks from the date of shipping
Other countries not listed above: 3 to 6 weeks from the date of shipping

Please keep in mind that these are rough estimates and shipments can be delayed due to unforeseen circumstances, like postal strikes or severe weather.

If, for some reason, you don’t receive your order within the estimated time frame provided above and suspect that it might be lost in transit, please submit a support ticket from your transactions page and we can look into the order with the courier. Lost-in-transit requests must be submitted to SHENZHENAUDIO Support within 4 months of the date of shipping or before the courier archives the tracking information.



Easy 30-Day Return Policy

If you are dissatisfied with your purchase for any reason, you may return it to SHENZHENAUDIO within 30 days of the received date, subject to the conditions and exclusions below.



Eligibility Conditions

Please read conditions below. If all conditions are not met, SHENZHENAUDIO reserves the right to refuse the return. All returned items must be in new condition, in their original unaltered box (including an intact UPC code) and must include all packing material, blank warranty cards, manuals and accessories. SHENZHENAUDIO can only refund the original purchase price. Shipping and handling fees are nonrefundable.



Defective or Damaged Items

Defective items may be repaired, exchanged or refunded at our discretion for the same model or manufacturer's equivalent model.



Exchanges

Depending on where you live, the time it may take for your exchanged product to reach you, may vary. Please allow 3-5 business days for mail-in exchanges to be processed.



Refunds & Credits

Once we receive and inspect your item(s), we will credit your account. Please allow 5-7 days for a credit to appear on your account. In most cases, we will issue your refund in the same way you made the original purchase. Please note: we can only refund the original purchase price. Shipping and handling fees are nonrefundable.

You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.



Shipping

To return your product, you should mail your product to: Rm306, Block A, ChengShiShanHai Center, ZhongXing Road ,Bantian Street, LongGang Zone, Shenzhen, Guangdong, China

If you’ve done all of this and you still have not received your refund yet, please contact us at support@shenzhenaudio.com.