Note: It is pre-order status from Nov. 12th.

Note: It is in pre-order status from Dec 19th.

(Note: short of stock untill the end of December) The Next Generation of Mangird Tea...

 

Features:Model: E30 II Lite Model: L30 II Model: C006Material: Black gold-plated NC3MXX-B and nc3fxx-b of NEUTRIK; Two-core braided HiFi line L-2T2S of CANARE;Plug: Black gold-plated NC3MXX-B and nc3fxx-b of NEUTRIKWire length: 20cm/50cm(excluding plug)Number of conductors: 2pcs;Standard cable diameter: 6mm+0.15Conductor cross-sectional area: 0.30mm/23AWGQuantity of conductor copper wires: 60pcsDiameter of conductor copper wire: 0.08mmTorque: 20mmCore DC Resistance: 6.40/100mShielded DC Resistance: 3.10/100mThermal shock: 120 CX for 1 hour, no crack;Voltage Test: 1000 Vdc X 1 Minute,OKConductor impedance: <900/kmConductor insulation layer: XLPE polyethyleneShielding material: 80*0.1mm braided copper wireShell material: soft PVC/neoprene  

A70PRO fully balanced headphone amplifier D70 Pro SABRE Model: Fanmisic C006 Material: Black gold-plated NC3MXX-B...

Features:Model: E70VPCMUSB IN:44.1kHz-768kHz/16bit-32bitCOAX/OPT IN:44.1kHz-192kHz/16bit-24bitBT IN:AAC/SBC/APTX/APTX LL/APTX HD/APTX-Adaptive/LDACDSD(Native)USB IN:DSD64-DSD512COAX/OPT IN:can not supportBT IN:can not supportDSD(DoP)DSD64-DSD256 COAX/OPT IN:can not supportBT IN:can not supportE70 VELVET DAC parameters (LineOut/USB In@96kHz )RCATHD+N (A-wt)<0.00008% @1kHzTHD@90kBw (No-wt)<0.0002% @20-20kHzSNR (A-wt):125dB @1kHzDynamic range (A-wt):125dB @1kHzFrequency Response:20Hz- 40kHz (±0.3dB)  /20Hz-40kHz (±0.2dB)Output Level：2.1Vrms @0dBF S(4V Mode)2.5Vrms @0dBFS(5V Mode)Noise (A-wt)<1.3uVrmsChannel Crosstalk：-130dB @1kHzChannel Balance：0.3dBOutput Impedance：50ΩXLRTHD+N (A-wt)<0.00006% @1kHzTHD@90kBw (No-wt)<0.0002% @20-20kHzSNR (A-wt):131dB @1kHzDynamic range (A-wt):131dB @1kHzFrequency Response:20Hz- 40kHz (±0.2dB)  /20Hz-40kHz (±0.8dB)Output Level：4.2Vrms @0dBF S(4V Mode)5.0Vrms @0dBFS(5V Mode)Noise (A-wt)<1.3uVrmsChannel Crosstalk：-143dB @1kHzChannel Balance：0.3dBOutput Impedance：100Ω*Note: The above data is the result obtained from TOPPING lab test under AC220V 50Hz and E70 VELVET set to 5V output mode .Model: L70Ultra-High Performance NFCA modulesL70 uses same NFCA (Nested Feedback Composite Amplifier) module with...

Features: Model: E30 II 2*AK4493S DAC chip AK4493 is a new generation of premium model...

Specifications:Model: ATOM 3Decoding chip: ESS9280 AC PROCrystal oscillator: Femtosecond crystal oscillatorOutput port: 3.5mm SEInput: Type-C/LightningFrequency...

The First Portable DAC/AMP BLON proudly presents its first V1 series, a portable DAC/amp featuring...

   

Parameters: Battery: 3.8V/5000mAh Screen: 0.91 inch OLED Applicable OS: Win7/8/10, Linux, Mac OS X, IOS, Android system Frequency Response: USB/SPDIF:...

Note: This item is excepted to be available by the end of February 2026.

Product Parameter:DAC Chip:ESS9118ECSampling frequency:PCM:16-32Bit/44.1kHz-384kHz                        ...

Product Highlights: Four output modes: Headphone Amp, Headphone Amp+Line out, DAC, and Pre-amplifier. QCC5125 chipset,...

Introduction: DX1 is a small desktop computer that supports USB input, amp + Line out...

As for DAC chip, TOPPING used a single ESS ES9038QM DAC chip inside the D10s....

Spec:PCMUSB IN:44.1kHz-768kHz/16bit-32bitCOAX/OPT IN:44.1kHz-192kHz/16bit-24bitBT IN:AAC/SBC/APTX/APTX LL/APTX HD/APTX-Adaptive/LDACDSD(Native)USB IN:DSD64-DSD512COAX/OPT IN:can not supportBT IN:can not supportDSD(DoP)DSD64-DSD256 COAX/OPT IN:can not supportBT IN:can not supportE70 VELVET DAC parameters (LineOut/USB In@96kHz )RCATHD+N (A-wt)<0.00008% @1kHz THD@90kBw (No-wt)<0.0002% @20-20kHzSNR (A-wt):125dB @1kHzDynamic range (A-wt):125dB @1kHzFrequency Response:20Hz- 40kHz (±0.3dB)  /20Hz-40kHz (±0.2dB)Output Level：2.1Vrms @0dBF S(4V Mode)2.5Vrms @0dBFS(5V Mode)Noise (A-wt)<1.3uVrmsChannel Crosstalk：-130dB @1kHzChannel Balance：0.3dBOutput Impedance：50ΩXLRTHD+N (A-wt)<0.00006% @1kHzTHD@90kBw (No-wt)<0.0002% @20-20kHzSNR (A-wt):131dB @1kHzDynamic range (A-wt):131dB @1kHzFrequency Response:20Hz- 40kHz (±0.2dB)  /20Hz-40kHz (±0.8dB)Output Level：4.2Vrms @0dBF S(4V Mode)5.0Vrms @0dBFS(5V Mode)Noise (A-wt)<1.3uVrmsChannel Crosstalk：-143dB @1kHzChannel Balance：0.3dBOutput Impedance：100Ω*Note: The above data is the result obtained from TOPPING lab test under AC220V 50Hz and E70 VELVET set to 5V output mode . 

Spec:PCMUSB :44.1kHz-768kHz  16bit-32bitOPT/COAX : 44.1kHz-192kHz  16bit- 24bitDSD (Native) USB :DSD64-DSD512 OPT/COAX :Not supportedDSD (DoP)USB : DSD64-DSD256OPT/COAX :Not...

                             ...

Description： The TOPPING L30 is a new product with Ultra-High Performance NFCA modules,uses the same NFCA...

An SEPP (single-ended push pull) OTL circuit operating in Class-A, the Little Dot MK II...

Fully discrete NFCA also create wonderful amp As its name, A90 Discrete uses fully discrete...

Features:APX555B limited our measurement againThe THD+N of A30Pro is no higher than 0.00006%，which means the...

  Parameters: THD+N: <0.00006% DRN: 145dB Noise: <0.3uVrms Output Impedance: <0.1Ω Max output power: 3500mW...

Description:Improved NFCA L30 II uses redesigned NFCA (Nested Feedback Composite Amplfier)module. It provides 2x output  power at 300Ω load compared to L30.The new circuit has 0.3uV ultra low noise and 144dB dynamic rangeas well as 0.00006% THD+N.Sound quality is never a problemWith the help of NFCA, L30 II easily reach the top of the industry, and it has almost perfectperformance regardless of distortion, dynamic range, and multi-tone testing.Compatible with almost all kinds of headphonesL30 II's output has high output voltage, high current,...

Features:Ultra-High Performance NFCA modulesL70 uses same NFCA (Nested Feedback Composite Amplifier) module with A90. Voltage...

A70PRO fully balanced headphone amplifier Newly developed ultra-low noise input stage further improved the noise...

Features: 1.About Tube+Transistor Hybrid amplifer Front tube amplifer and rear transistor combine the advantages of...

Parameters: Power Supply: DC12V/2A Gain: +15dB Output Power: 2000mw( 1KHz,32Ωload ) Size :17*10* 6cm Dynamic...

The All-New Little Dot MK III succeeds our Little Dot II++ by improving upon it...

The Little Dot MK VI+ is our flagship headphone amplifier/pre-amplifier in the Little Dot MK-series....